Thermo chiller S20 +5/+40°C HRSH090

Home » Steroglass » Cosmetics Laboratory » Thermo chiller S20 +5/+40°C HRSH090

The HRSH090 thermochiller is designed to meet the thermostating needs of medium-sized instruments, and it is best used in conjunction with rotary evaporators and coolers for reactors or distillation.

Therefore, the HRSH090 thermochiller is the optimal choice when combined with a Strike 20 or a Pilot Reactor Steroglass.

Using a thermochiller will guarantee you not only reliability and precision, but also safety.

Thanks to the presence of three inverters that control the number of rotations of the compressor, fan, and pump motor, electrical consumption is reduced by up to 53%. The HRSH series accurately monitors and controls the cooling system, allowing you to focus on other tasks. Use a smart solution that provides proactive control. Predict any changes via remote control and manage anomalies and issues in the cooling system.

Through simultaneous control of the compressor and fan with the DC inverter, and the electronic expansion valve, a temperature stability of ± 0.1 °C is maintained even when the thermal load fluctuates significantly.

Benefits

PRACTICAL FUNCTIONS

RELIABILITY

SAFETY

PRACTICAL FUNCTIONS

RELIABILITY

SAFETY

EXAMPLES OF APPLICATION +

Condensation of solvents in rotary evaporators

Strike 20 Condensation of steam in Pilot Reactor

Condensation of steam in distillation equipment

Machines for laser processing

Machines for laser welding

Machines for laser cutting

Cleaning machines

Printing machines

Plastic injection

Arc welding machines

Resistance welding machines (spot welding)

High-frequency induction heating machines

Water cooling available anytime, anywhere

TECHNICAL FEATURES +

Cooling method: Air cooling

Refrigerant: R410A (HFC)

Refrigerant charge: 1.32 Kg

Control system: PID control

Ambient temperature / humidity / altitude: Temperature: 5 to 45 ° C

Circulating fluid system:

Circulating fluid: Tap water, 15% ethylene glycol aqueous solution, deionized water

Operating temperature range: 5 to 40 ° C

Cooling capacity (50/60 Hz): KW 9.5

Heating capacity (50/60 Hz): KW 2.5

Temperature stability: ± 0.1 ° C

TECHNICAL FEATURES 2 +

Pump:

Nominal flow rate (50/60 Hz): 45 l/min (0.5 MPa)

Maximum flow rate (50/60 Hz): 60 l/min

Maximum lifting height (50/60 Hz): 50 m

Adjustable pressure range: 0.1 – 0.5 MPa

Maximum operating flow: 20 l/min

Tank capacity: 18 L

Circulating fluid inlet and outlet port: G 1

Tank drain connection: G 1/4

Material in contact with the fluid:

Metal: Stainless steel, copper (heat exchanger brazing), brass (pump, Y-filter), carbon, SiC

Resin: PE, PVC, POM, PTFE, NBR, EPDM, FKM

Electric system:

Power supply: Three-phase 380 to 415 V AC (50/60 Hz)

Permissible voltage range: ± 10% (Without DC voltage fluctuation)

Ground leakage current switch:

Rated current range: [A] 20

Leakage current sensitivity: [mA] 30

Rated operating current: [A] 8

Power consumption: [kW (kVA)] 5.0 (5.6)

Noise level (at 1 m distance): [dB (A)] 66

Dimensions (LxWxH): mm 377x970x1080

Weight: 130 kg

Other products

Steroglass

ONE – F&B analyzer

Steroglass

Alcodens hydrostatic balance

Steroglass

EasyCheck-Tartaric stability analyzer

Steroglass