The range of MiniBio fermenters and bioreactors with volumes of 250ml, 500ml, and 1000ml is perfect for representative scale-down activities in the laboratory compared to classic benchtop bioreactors.
MiniBio systems offer the same flexibility as a classic system for both fermentation and cell culture, allowing them to be complemented with accessories to cover all the needs of any biotechnological process. The smaller working volume with real scalability enables cost savings while also minimizing space. They are available in ready-to-use configurations for both microbial and cell cultures.
The possibility of using single-use Appliflex ST vessels or traditional glass vessels up to 3 liters.
WHEN TO USE A MINIBIO:
Each system comes with:
The my-Control is a controller dedicated to small-scale bioreactors and fermenters. Each controller can manage:
MiniBio bioreactors of 250, 500, and 1000 ml
Autoclavable bioreactors and fermenters from 1 liter to 3 liter
Single-use cell culture bioreactors of 3 liters Mobius Cellready
PID thermostatic control with autotuning and adaptive control;
Process display with data and synoptic view via web browser (Internet Explorer, Chrome, Safari…) for PC, Mac, Android, iPod, iPhone, or iPad;
Possibility of setting up a network from 1 to 32 my-Controllers in parallel;
Integrated control for pH, DO, temperature, level, foaming, and agitation;
Actuators for 6 variable-speed pumps or micro valves for additions, up to 4 Mass Flow Controllers for precise gas dosing, Heating and cooling via Peltier element or flexible silicone electric heater, Condenser cooled via Peltier element or recirculation of cooling fluid;
Available inputs and outputs: 8 digital outputs, 4 analog inputs (0 – 10 V), 4 analog outputs (0/4 – 20 mA);
USB port for Biomass sensor or Presens Fluorosensors for pH and DO.
Total volume 250 ml, working volume 50 ml .. 200 ml
Total volume 500 ml, working volume 100 ml .. 400 ml
Total volume 1000, working volume 200 ml .. 800, Batch mode, Fed-Batch mode, perfusion mode, and continuous cell culture, Borosilicate glass vessel, Headplate and additional elements made of electropolished 316L steel.
pH and DO2 sensors;
Perforated septum for additions and inoculation;
Foam sensor and level sensor;
Gas inlet in headspace;
Chemostat;
Temperature sensor well;
Sparger for aeration or gas injection (L-shaped or with porous septum);
Multiple inputs for liquid additions, sample withdrawal;
Condenser for exhaust gases;
No need for cooling water or jacketed vessel thanks to the heating and cooling system via Peltier module.
Possibility of adding additional sensors
Prepared for nutrient additions in feed mode with balance
Freely configurable, open system
Easy to use like a smartphone
Individual colors for easy process identification. Front LEDs visually indicate the system status: Green/OK, Red/Alarm, Blue/Stand By
Expandable, pumps, actuators, MFC&
Truly realistic for scale-down studies
Space-saving: 5 MiniBio fit in 1 meter x 60 cm!
The software is inside the controller, if the PC crashes, the process continues independently!
KFFR069110 | MiniBio bundle 1000ml microbial 115/230V |
Z4MMY1000C | MiniBio bundle 10000ml cell 115/230V |
KFFR071175 | MiniBio bundle 500ml microbial 115/230V |
Z4MMY0500C | MiniBio bundle 500ml cell 115/230V |
Z4MMY0250M | MiniBio bundle 250ml microbial 115/230V |
Z4MMY0250C | MiniBio bundle 250ml cell 115/230V |
We will answer a soon as posible.